Motor mounts -

-
BIG-B-Barracuda

BIG-B-Barracuda

Well-Known Member
Joined
Dec 25, 2011
Messages
1,171
Reaction score
87
Location
CALIFORNIA
1968 barracuda
440 magnum off of a charger.
power steering
front 73 A-body disc brakes.

not sure what K-member i have ....

my question is, NEW motor mounts which to get.

to match the motor? to match the k-member? to match the car?
 
Start with which K frame you have. Either the biscuit or spool mount. And if biscuit, what was the original motor. Regardless, Schumaker will have you covered.. new mounts have to match the motor AND the k frame type AND the motor the K frame was made for - 6 cyl, small block, etc. ALL ARE IMPORTANT.
 
- car was originally a v8 318... let me search on here i know i might have some photos that might help us to decipher what k-member i have...

i remember a FABO member saying that indicating what steering box i had could help decipher this? or the was my sway bar was set up?
 
I am going to go out side and pop under the car to see what i can see.

so most likely stock A-body V8 k-frame
with the 1973 charger 440 RB. would be my guess.
so if i am right what motor mounts do i get?
 
seeing how i already have the mounts... can i only purchase the rubber inserts anywhere?

or is the rubber attached to mount?
 
You must log in or register to reply here.
-

Back
Top