[WANTED] Oil filter adapter

[Ryan ekes]

Looking for a cast iron 90 degree oil filter adapter for 340

 

[383Scampman]

I have one . Complete but needs gaskets . Tom

 

[cwirth7]

I have one complete with bolt. PM if interested

 

[kenworthgoose]

I have one also. Let me know.

 

[crewchief]

I have as well with gaskets, $50 plus shipping

 

[hwd2]

I have as well with gaskets, $50 plus shippingView attachment 1715098447View attachment 1715098448

This looks like aluminum - what is it worth to you?

 

[crewchief]

This looks like aluminum - what is it worth to you?

It is, PN 4179425. Not looking to give it away

 

[physixx]

I have a few both cast and aluminum so put me next in line.

If someone else is interested, PM me. Please don't hijack the post.

Ken
Edison, NJ

 

[Oldmanmopar]

Some of the aluminum are for magnum blocks they are different than the early LA. The offset on the mounting flange is different. I ran into this with my R-3 block. I had to find one for a magnum because the LA would not seal. Be careful on your application. I have the early cast LA the going price is $45 shipped in the US lower 48. No gaskets included

Also there are three gaskets two for the bolt. one thin and a thick cork on the inside and one large for the outer diameter

 

[davescuda]

Looking for a cast iron 90 degree oil filter adapter for 340

I have one for you

 

[GTXperience]

This looks like aluminum - what is it worth to you?

I'll take a guess and say $50 + SH.

 

[crewchief]

I'll take a guess and say $50 + SH.

Yes, and have the cork gasket for the bolt that wasn't pictured too

 

[hwd2]

I know my aluminum one will fit LA's for sure since it is over 30 years old and sitting in my cupboard all that time. I have cast-iron in '73 Challenger due to use of early HP manifolds for few years. Now back to OEM ('73) pieces but 'clearance' issues with custom exhaust would not allow the simple 'plate' (such as with 318's) as filter (even PH43) would hit pipe and 'dimpling' side (of filter) too rednecky.