Barracuda Dan
Well-Known Member
Looks very good.
Oil dip stick and tube. From where?
It was on the car when I bought it. Year One sells oil stick and tubes. Thanks
Part Number: A0186
Looks very good.
Oil dip stick and tube. From where?
looks good enough to me !Like I've said elsewhere, I can't build the real deal clone, but I'm happy with how mine is coming so far.View attachment 1715223870 View attachment 1715223871 View attachment 1715223872
looks good enough to me !
Yes, and a clone is hardly even drivable
???
Why is a clone not drivable?
View attachment 1715224054 ....I don’t know....mine is pretty driveable..
It's true, if you make a true clone, your running 4:88 gears with 1540 cfm carbs and a mech advance distributor running at full advance at 1,600 rpm, 12:5 compression pistons on race gas you are running at the edge of what's streetable. That what's I'm running, but I only driving it at the local cruise nights not too far from home. Nothing like hitting the throttle smoking the tires at ease. lol.
View attachment 1715224362
A clone is to look like something else.
You can’t see gear ratio, well-thought-out/realistic/reasonable cam specs, true pump gas compatible compression ratio, and cubic inches.
.
.
.
If you’re in a box, you can still think out of the box.
Nice car , almost like looking in a mirror !~It's true, if you make a true clone, your running 4:88 gears with 1540 cfm carbs and a mech advance distributor running at full advance at 1,600 rpm, 12:5 compression pistons on race gas you are running at the edge of what's streetable. That what's I'm running, but I only driving it at the local cruise nights not too far from home. Nothing like hitting the throttle smoking the tires at ease. lol.
View attachment 1715224362
View attachment 1715224054 ....I don’t know....mine is pretty driveable..
Anybody know anything about the Hemi dart clone just listed...and removed from EBay? Wonder if it sold and for how much. Looked like a well detailed car.
---I’m working on a Dart. A 68. It Started out as a big block Dart plan to use up spare parts, and a winter project to last several winters. Now it’s taking on the Superstock look. More and more, I’m being haunted by it needing a Hemi. Here’s where I’m at.
Bottom Is pretty much done.
View attachment 1715262063
Dana housing is narrowed to fit the relocated springs and tubs.
View attachment 1715262062
Roll bar is in.
View attachment 1715262064
Sheet metal in place to properly line the new quarter panels.
View attachment 1715262066
Left side quarter installed, wheel opening done. Right side started. Wheel set in place for a visual. Fuel filler delete.
View attachment 1715262065
Fuel cell in place. Spare tire tub raised 3”.
View attachment 1715262067
—-Been following your thread....you know your chit.