360tripleblack7
Gold Member
Hello Guys,
I'm changing the Camshaft and Valve springs... So I'm having some concerns if my current pushrods will resist at this new valve springs pressures.
My current pushrods:
Brand: Crane Cams
Pushrod Tube Diameter: 5/16 in.
Pushrod Material: Chromoly
Wall Thickness (in): 0.050 in.
Valve springs pressure:
Spring Rate (lbs/in): 363
Coil Bind: 1.140
Seat Load: [email protected]"
Open Load: [email protected]"
Installed height: 1.880"
I'm changing the Camshaft and Valve springs... So I'm having some concerns if my current pushrods will resist at this new valve springs pressures.
My current pushrods:
Brand: Crane Cams
Pushrod Tube Diameter: 5/16 in.
Pushrod Material: Chromoly
Wall Thickness (in): 0.050 in.
Valve springs pressure:
Spring Rate (lbs/in): 363
Coil Bind: 1.140
Seat Load: [email protected]"
Open Load: [email protected]"
Installed height: 1.880"