Rallye Dash Oil Pressure Gauge - WANTED

[marianamaya]

Does anyone have a working oil pressure gauge that they are willing to sell?

Could use one for my 70 340 Swinger.

Pete

 

[jimjimjimmy]

check ebay i sen a few on there not that long ago i think

 

[marianamaya]

Thanks

 

[Rocky_JS]

Seems kind of pricey for one but, FYI should be about 20ohm between the two pins to assume good.

http://www.ebay.com/itm/Mopar-1967-...7|Model:Barracuda&hash=item4d06ada4a4&vxp=mtr

 

[RedFish]

Seems kind of pricey for one but, FYI should be about 20ohm between the two pins to assume good.

http://www.ebay.com/itm/Mopar-1967-1972-Cuda-Dart-340-Demon-340-Duster-Ralley-Dash-Oil-Pressure-Gauge-/330824524964?pt=Vintage_Car_Truck_Parts_Accessories&fits=Year%3A1967%7CModel%3ABarracuda&hash=item4d06ada4a4&vxp=mtr

ROFL
That one shows oil pressure while laying on a table.
I can completely restore it for 62 bucks .

 

[Rocky_JS]

The tang is bent and holding the gauge needle. But for $12 more for a restored one. As always you're the man!

He should contact http://www.demonivr.com/

 

[Oldmanmopar]

I have several if still needed

 

[barracudakid]

i have that.
pm me

 

[RedFish]

The tang is bent and holding the gauge needle. But for $12 more for a restored one. As always you're the man!

Why that needle stop was bent to extreme ( Just for everyones edumacation ) .
The movement distorts and the needle sticks at its home position. Start the engine and see no oil pressure. Tap on the lens until it breaks away from the bezel and falls on the gauges scaring multiple needles orange paint and restricting all movement.
Take it apart , glue the bezel/lens back together, rig the oil gauge so it doesn't go home and stick there. Drive on.