ESP47
Well-Known Member
68 Barracuda. 10" drums on an 8 1/4" rear. New shoes and hardware. E brake disconnected at the adjuster. Brake adjusters threaded as far in as they'll go.
The drums are tight on both sides. I can get the drums on but they are tighter than I would ever want them and that is with the hardware adjusted as far in as possible. Any ideas what could be happening here?
The drums are tight on both sides. I can get the drums on but they are tighter than I would ever want them and that is with the hardware adjusted as far in as possible. Any ideas what could be happening here?