Roller or Flat mech cam?

[drugster]

Hi:
Im refreshing my sbm and planning on upgrade the top end, so gonna change the Eddy heads and Airgap for a set of Airwolfs (or something very similar) and Super Victor.
Its an all forged bottom, flat top pistons, 12-1, 850 Holley Ultra Hp, 1 7/8 headers, 3800 converter (prob needs more stall), 4.56 rearend, 28.5X10, 3350 lbs.
Looking this two cams:
http://www.summitracing.com/int/parts/hrs-710782-08/overview/
http://www.summitracing.com/int/parts/hrs-712123-06/overview/
What you think is a better option?
Thanks

 

[rmchrgr]

Looking at the rest of the combo, go with the roller. You will need a new converter for sure. Might even want to consider a custom grind.

 

[70aarcuda]

airwolf heads are disappeared off the face of the earth...

Before choosing the camshaft...i would figure out what heads I would use...and confer with the head porter as to what camshaft to use...

 

[rmchrgr]

airwolf heads are disappeared off the face of the earth...

Paging Dr. J....

http://board.moparts.org/ubbthreads/showflat.php?Cat=0&Number=8308666&an=0&page=3#Post8308666

 

[70aarcuda]

Paging Dr. J....

http://board.moparts.org/ubbthreads/showflat.php?Cat=0&Number=8308666&an=0&page=3#Post8308666

yes...that is why I said they have disappeared....getting divorced...took money for heads and has not delivered.

 

[OldmanRick]

Before choosing the camshaft...i would figure out what heads I would use...

This...^^^^^^^^^.

But when you do decide, try and work the "roller" into the package also. :thumbrig: