small block engine mount

[crazy 340]

wondering whats you are using as engine mount

I have the qa1 cross member and was using the napa engine mount
but they are so soft , the engine is bouncing around under the hood
and Im affraid they gonna split apart so ...

I know mancini racing and other are selling rod to avoid that but
Im sure there is mont that will keep my engine under the hood at the right place

 

[Darter6]

Schumacher Creative Services "Poly Loc" mounts. Also PolyBushings.com
I was looking for new Poly engine mounts for a 64 dart Slant 6 and PolyBushings had them.They have most all mounts,bushings etc for Mopars.

 

[pishta]

those A's could be made if the weld doesnt melt the poly filler. interesting approach.

 

[340doc]

I've the poly loc in my Dart for 17 years, motor stays quite still with a choppy cam.

 

[72SwingerJosh]

These are rubber so don’t vibrate like poly or solid mounts and have a lock built in them so they can’t tear.
Mancini Racing Mag Mount Set

 

[AJ/FormS]

I use the factory biscuits but with a Schumacher restrainer. My hood hardly vibrates at all,lol. My biscuits are from the 70s, double lol.

 

[crazy 340]

Im going with the one from schumaker with the lock in them