JD Erisman
Well-Known Member
Contact seller
I have a brand new Edelbrock aluminum head for a small block LA (60779), also comes with a brand new set of valves, seals, shims and locks for the same Edelbrock head. None of these were ever run on an engine. I ruined one head by trying to hog out the push rod holes, bad idea. Instead of just buying another Edelbrock head I went back to square one and didn’t use the remaining good head. From the head I ruined, I removed the valves, valve locks, shims and seal and bagged them as individual groups. When I received these heads I had a reputable machine shop disassemble them and clean them, they still had some casting material in them. Included is a new set of ARP cylinder head bolts, again, never used. You can purchase a bare Edelbrock head, minus the valves, for around $500 then install these brand new valve sets. The ARP bolts are about $80, new complete 60779 head is $770. A bare head is $600 (all Summit Racing prices). Asking $400 for the head, bolt kit and complete valve set, all are brand new-NEVER BEEN RUN ON AND ENGINE, NEVER EVEN INSTALLED. You pay shipping, to the furthest point in the continental USA is $115 via USPS Priority Mail. Might be less if you live considerably closer but that’s up to the Post Office. These are coming from Kenai, Alaska 99611