[WANTED] Small block pulleys for crank and water pump......

[dustergal]

WANTED: small block crank pulley! Car is non AC.

PM on the board

 

[72Dart6pack]

Water pump pulley will be part # 2951836 For your reference. Good luck on your quest.

 

[krazykuda]

What year car??? Pre 69 or post 70....

 

[dustergal]

What year car??? Pre 69 or post 70....

It's off a 1978 318.

 

[dustergal]

Water pump pulley will be part # 2951836 For your reference. Good luck on your quest.

Thanks! Got the water pump pulley, just need the crank pulley.

 

[krazykuda]

Thanks! Got the water pump pulley, just need the crank pulley.

Here are two sources for what you are looking for:

main pulley page:

Products: Pulleys - Bouchillon Performance Engineering

Pulleys


crank pulley main page:

Products: Crankshaft Pulleys - Bouchillon Performance Engineering

Crankshaft Pulley


crank pulley that you need:

BPE Double-Groove Crankshaft Pulley - Bouchillon Performance Engineering

Crankshaft Pulley with Power Steering w/o AC

 

[Alaskan_TA]

I may have one Sis, I'll look...........

 

[Alaskan_TA]

No luck. Sorry kiddo.

 

[QuickBpBp]

I have about 50-60 pulleys if anyone knows the height/diameter or part number to help her out I probably have it.... Also manual steering(single groove) or power steering(double groove)

 

[dustergal]

No luck. Sorry kiddo.

That's okay Barry! Thanks for looking!

 

[dustergal]

I have about 50-60 pulleys if anyone knows the height/diameter or part number to help her out I probably have it.... Also manual steering(single groove) or power steering(double groove)

I'm looking for a double groove pulley, but the groove closest to the harmonic balancer is a smaller diameter. I will try to get a picture of what I need! Thanks guys!

 

[dustergal]

pic...not the best, I used my daughter's ipod to take a pic of the one on our Challenger and I stink at it! ha ha

 

[QuickBpBp]

pic...not the best, I used my daughter's ipod to take a pic of the one on our Challenger and I stink at it! ha ha

View attachment 1715060706

Ok I will look and see what I have and let you know. I have a crate full of them so should be in luck...

 

[etngeorge]

I believe that part number is 3614378

 

[QuickBpBp]

Found a small block pulley. It has the shorter inner pulley. It is 2 1/2 inch high and 6 3/4 wide. I think it has an offset pattern 71-back so you may have to file that one hole to fit if you have an offset balancer. $40 plus shipping. Let me know if interested.