small vs large sector steering box case size

[darto]

Hello does anyone happen to have the dimensions/ spec sheet of the small sector steering box? I currently have a large sector box in my 1967 Dart and it is hitting the TTI w2 headers at the top by on the cover plate I removed the bolt but it still hits the cover. (The engine is sitting properly as per TTI specs) I was wondering if cases are different and if changing the box would fix this.

Thanks,
Rob

 

[Jim Lusk]

Power or manual?

 

[70aarcuda]

http://www.bigblockdart.com/techpages/steeringbox.shtml

some info

 

[darto]

Its a manual steering box.

 

[darto]

I'm looking specifically for the measurements where the arrows are as the small sector box looks like it is different from the large sector box.

 

[BillGrissom]

I didn't know you could even interchange small and large sector gear boxes, since the steering linkages were different from 1972- and 1973+ cars. In early cars, the Pitmann and idler studs point up, or at least do in my 1964 & 65 A's (different still since narrower cars). Perhaps you can get a custom Pitmann arm to fit both your linkage and a small sector gear box.