66signet
Well-Known Member
I have two bell housings. First one is a cast iron 9 1/2 in for 122 tooth flywheel. I cut it to use with an overdrive trans with 5.125 in bearing retainer. No cracks and all the threads look good. 100.00 plus shipping
Second one is a 68 cast iron with 4.354 in. hole. No cracks and threads look good 200.00 plus shipping
also have a dust cover for 10 1/2" bellhousing 45.00 plus shipping from Omak WA
Second one is a 68 cast iron with 4.354 in. hole. No cracks and threads look good 200.00 plus shipping
also have a dust cover for 10 1/2" bellhousing 45.00 plus shipping from Omak WA
