Yes but theyre 1/4" smaller than stock mechanical pushrods and around 1/8 smaller than hydraulic.Can you use these with the 273 mechanical rockers?
I think that depends on how Smith Measures? I think they are probably 7.250" Ball to inside cup. Which makes them about 7.389" total length? That is my guess. But I am known to be wrong.Yes but theyre 1/4" smaller than stock mechanical pushrods and around 1/8 smaller than hydraulic.
Jake
So they’re total length is 7.375? Were they ordered for adjustable hydraulic lifters?They are not oil thru. Stumblinhorse is correct on the measurement. The 7.250 is tip of rod to bottom of cupped side.
I am not sure about the external total length. The way they are measured is bottom of pushrod to the bottom of the cup on the inside where the adjuster seat is. I can’t remember what that cam was anymore. Been a long time.So they’re total length is 7.375? Were they ordered for adjustable hydraulic lifters?
Thanks
Thanks.I am not sure about the external total length. The way they are measured is bottom of pushrod to the bottom of the cup on the inside where the adjuster seat is. I can’t remember what that cam was anymore. Been a long time.