Some new Progress pics.

[Eric_S68]

Here's what I did to fix my Trunk rail and right A-pillar. I used lead for the major fill areas followed by minimal bondo.

 

[Eric_S68]

OK i'll try again

 

[lemonboy69]

Wow! Bodywork and sheetmetal work are beyond my skills, so those that can pull off something like that and make it look that good amaze me! GREAT job!!

 

[onehellofadart]

Looks good!

 

[66dartman]

Nice work!!! Great to see you save that one.

 

[Eric_S68]

Ok!!! Here it is ..... 2 new progress pics of the car.. So far, I've replaced both frt floor pans, L/F lower 1/4, L/R lower 1/4 panel, R/R lower 1/4 panel, both trunk floor extensions to the 1/4 panel. Not to mention replacing both a - pillars from a donor car and adding 73' tailight openings. Well, 2 years later I see some light at the end of the tunnel. I gotta weld the subframes in (there bolted now) Add the roll cage (10pt.) (gotta get it) I'm waiting for the NHRA Rule book before I go any further.

BTW-- A friend n I took the donor car tonight for a quick ride to the 7-11 for some beers :drinkers: (It's done a 12.20 on street tires) We had a quick 1/2 hour of fun :thumblef:

 

[lenweiler]

Nice work!

 

[halfaed]

Thats how I do it too! Cut and weld, Cut and weld, Cut and weld!

 

[Eric_S68]

:thumblef: Stay Tuned primer n paint pics to come

 

[lemonboy69]

Looking forward to them!