Superformance Oil Pan Gasket

-

earlymopar

Well-Known Member
Joined
Feb 26, 2016
Messages
169
Reaction score
108
Location
Oregon
I just opened my Superformance oil pan gasket set today and noticed a notch on one side of each of the 2 molded end seals. I'm looking for feedback on what the notch is for and which side that should be on (facing inboard or out). The fiber washer is also a question as to what that is intended for.

Thanks much.





End Seal and Fiber Washer.jpg


End Seal and Fiber Washer.jpg
 
I have used that gasket before. I didn’t notice a knoch on mine, but I would put it on the inside, and see how it fits. I think that the fiber washer would be for the drain plug.
 
Thanks Sterling. I sent the same question and picture to Superformance as well just to confirm.
 
I have used that gasket on my 416 build two months ago. Knoch on the inside. I used it on a milodon 8 quart street pan.
 
-
Back
Top