Suspension mods vendors and p/n?

[OleNatesOlds]

I've been hearing about these mods that are being done, but not sure where to get them or which one:

1) Adjustable strut rods with heim joints)

2) Nylon LCA bushing (or is that what some call polyurethane?)

3) C-body tie-rods (model and years?)

4) Solid tie-rod sleeve. I think I read that PST sells them, but who else and was there ever an OEM part?

Thanks

 

[OleNatesOlds]

OK. Now I believe the answer to all four is "Firm Feel" though I think I could fab up some adjustable strut rods with some commonly available swaged Cr-Mo tubing in right lengths (advertised as 4-link tubing on eBay, I think), heim joints, and a few homemade brackets. Could also make solid tie rod sleeves with the tubing.

 

[72BBSwinger]

I got both upper control arms and strut rods from RMS. Greasable lower contol arm pins from Firm Feel. Front swaybar is Hotchkis. Torsion bars and rear springs are Mopar. Gonna get some Firm Feel 1.07 torsion bars in the future and maybe a Hellwig rear swaybar.