Valiant "down under"

-

walpolla

Well-Known Member
Joined
Jul 23, 2008
Messages
58
Reaction score
4
Location
Rawson,Australia
hello,
I've been a lurker here for a while,mostly looking at the jokes section.
finally decided to register and be an active member.
I have an Australian built VC valiant with the trusty /225 and the standard 3 speed gearbox.
a 2 barrel Carter,electronic ignition and 6 int 1 headers with a 2 and a half inch exhaust are the additions above standard.
click here for a pic of my toy.
interior is only a 2 seater,with 2001 Camry seats,4 point harness belts,and a sports steering wheel.
rear seats removed,with the spare wheel bolted to a bulkhead fitted to isolate the trunk area. the harness anchor points are on the rear parcel shelf,so rear seating is a no-no.
being Australia,the car is right hand drive,and the drum brakes are retained. (they work surprisingly well).
you will find me on other Mopar boards, - even on the enemy territory Stovebolt board.
thats enough for now. more when I get time.

regards,Rod:)
 
Welcome walpolla.
Great to have another fellow mopar from Australia.
That is one very nice 4 door brother.
I am sure you will enjoy this great site.
We have some of the best of the best tec's and some good folks too.
I still have the drums all around mine and like you said, (they work surprisingly well).
here is my 66 I call Victoria,
here are the parts I will be changing soon.
We have some great /6 tec's here that are keeping me in the right direction.
The Holly is a 390 cfm and All I need know will be a good exhaust.

zzzzzzzzzzzz.jpg


xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 001.jpg


wwwwwwwwwwwwwwwwwwwwwwwwwwww 121.jpg


wwwwwwwwwww.jpg
 
-
Back
Top