Valve springs for Howards cam?

[drugster]

Hi:
Ready to order a 712712-08 Howards mechanical flat tappet cam (254/260@050, .599/616 lift, 108 lobe separation) but cant find info about what springs, retainers and locks to use with it on some Edelbrock Performer Rpm heads for LA small block with Proform 1.5 shaft mounted roller rockers.
Will aprettiate any help, thanks.

 

[Abodybomber]

What is lash,on the cam?Let's start there.

 

[Abodybomber]

Start here,these guys rock. They have dealt ,with Edelbrocks before. [email protected].
CUSTOMER SERVICE
Monday-Friday 8am-5pm CST
Phone920) 233.5228
Fax: (920) 232.1572
I would be very careful,on valve guide to retainer clearance.Need a minimum,of .050" .Checking piston to valve ,a must. Good research,majes for a better finish.

 

[drugster]

.022 in.

 

[Abodybomber]

Email ,if you can.Cheaper.