[FOR SALE] welded LCAs for coil overs
- Thread starter swing69
- Start date
-
- Status
dale_brennon
Well-Known Member
How are these used with coilovers? How would you mount them?
swing69
fightin' socialism
http://hemiduster.com/coilover.htm
T bar socket gets covered with the HD plate washer. The bolt goes through a bronze bushing in washer center and threads into the center of the "pin". Pin goes through the K frame as stock and bolts in the front. Black rubbers are poly inserts for the pin side.
The only thing that needs to be done with these is to open up the hole is the washer to fit the OD of the shouldered bushing.
T bar socket gets covered with the HD plate washer. The bolt goes through a bronze bushing in washer center and threads into the center of the "pin". Pin goes through the K frame as stock and bolts in the front. Black rubbers are poly inserts for the pin side.
The only thing that needs to be done with these is to open up the hole is the washer to fit the OD of the shouldered bushing.
dale_brennon
Well-Known Member
Did you make these yourself or can you buy the kit? Also what did you use to enforce the shock tower? I know maddart used tubing and flat plate on the frame rails, did you do something similar?
- Status
-
