Jan 10, 2017 #1 KevinB Well-Known Member Joined Feb 20, 2015 Messages 851 Reaction score 317 Location Austin Can anyone suggest a kit? The intake is the M1 4barrel dual plane square bore.
Jan 10, 2017 #2 xLURKxDOGx "An angel fat, at satan's feast" Joined Dec 27, 2013 Messages 4,361 Reaction score 1,753 Location PHX Peyote said: Can anyone suggest a kit? The intake is the M1 4barrel dual plane square bore. Click to expand... Where did you get that manifold, I was looking everywhere for one. Jake
Peyote said: Can anyone suggest a kit? The intake is the M1 4barrel dual plane square bore. Click to expand... Where did you get that manifold, I was looking everywhere for one. Jake
Jan 10, 2017 #3 KevinB Well-Known Member Joined Feb 20, 2015 Messages 851 Reaction score 317 Location Austin xLURKxDOGx said: Where did you get that manifold, I was looking everywhere for one. Jake Click to expand... I bought it from the link below, and I bought the only one they had left. I believe it's discontinued Aluminum Dual Plane Intake 4-bbl Carb [P5007381ab] - $344.85 : CHICAGO CONNECTION, Your High Performance Parts & Accessory Shop
xLURKxDOGx said: Where did you get that manifold, I was looking everywhere for one. Jake Click to expand... I bought it from the link below, and I bought the only one they had left. I believe it's discontinued Aluminum Dual Plane Intake 4-bbl Carb [P5007381ab] - $344.85 : CHICAGO CONNECTION, Your High Performance Parts & Accessory Shop
Jan 10, 2017 #4 TrailBeast AKA Mopars4us on Youtube Joined Mar 11, 2011 Messages 22,483 Reaction score 12,020 Location Arizona 13 bucks or so from Summit. You probably couldn't get them all with washers from a hardware store for that. https://www.summitracing.com/search...2l-318/engine-family/mopar-small-block-magnum
13 bucks or so from Summit. You probably couldn't get them all with washers from a hardware store for that. https://www.summitracing.com/search...2l-318/engine-family/mopar-small-block-magnum
Jan 10, 2017 #5 Lelo Dart * Joined Oct 10, 2012 Messages 1,518 Reaction score 470 Location Knob Noster MO. https://www.summitracing.com/parts/dcc-4876772
Jan 10, 2017 #6 sireland67 FABO Gold Member FABO Gold Member Joined Oct 27, 2010 Messages 10,964 Reaction score 6,777 Location WV I bought mine from McMaster-Carr. I just bought stainless bolts and washers. I can measure one of them tomorrow. Congrats on getting the intake, I bought the second one they had left.
I bought mine from McMaster-Carr. I just bought stainless bolts and washers. I can measure one of them tomorrow. Congrats on getting the intake, I bought the second one they had left.
Jan 10, 2017 #7 sireland67 FABO Gold Member FABO Gold Member Joined Oct 27, 2010 Messages 10,964 Reaction score 6,777 Location WV They are pretty nice, it makes good power right from idle. It does take a small thermostat.
Jan 10, 2017 #8 sireland67 FABO Gold Member FABO Gold Member Joined Oct 27, 2010 Messages 10,964 Reaction score 6,777 Location WV Also, I drilled and tapped the center 1/8 NPT temp sensor hole to 3/8 npt to run a mechanical gauge. Along with the stock gauge. I think this was on over site by mopar.
Also, I drilled and tapped the center 1/8 NPT temp sensor hole to 3/8 npt to run a mechanical gauge. Along with the stock gauge. I think this was on over site by mopar.
Jan 19, 2017 #9 skizzo Fubar Emeritus II Joined Jul 22, 2015 Messages 153 Reaction score 22 Location Castle Rock, CO. 3/8" x1 1/4" socket heads are nice for access. I just used my old LA arp's. If you have a TCS near you you can get grade 5's pert cheap by the lb.
3/8" x1 1/4" socket heads are nice for access. I just used my old LA arp's. If you have a TCS near you you can get grade 5's pert cheap by the lb.
Jan 19, 2017 #10 sireland67 FABO Gold Member FABO Gold Member Joined Oct 27, 2010 Messages 10,964 Reaction score 6,777 Location WV What heads are you running? I have eldebrocks on mine and the bolt size is 5/16-18 x 2"