What shoud it run? Estimated HP anTQ?

[KnuckleDuster]

Duster
3225lbs with a full tank.
410 ci 360
10.1 scr
Stock 60779 Edebrocks 63cc
Hedman 1-5/8" headers and 2.5" exhaust
Proform 750 cfm carb on an Edelbrock Air Gap
TCI Streetfighter 727
3.23 Suregrip
275/60R15 (28"x10")
Factory pinion snubber
Espo 1" over springs
Factory front sway bar
Stock 340 torsion bars
Monroe Matic shocks front and rear
Welded MP frame connectors.

Finally getting the car sorted, but looking for ideas on what to expect and improvements on the combination.

Mainly a street cruiser but would love to hear tips to get it to turn respectable times at the track. I might swap in a 3.90 spool for racing. Fun car as is, just looking to learn.

 

[younggun2.0]

Rear gear is going to hurt. What is stall speed? Would be great with 3.91 and 3500+ stall. Would prob go low 12's high 11's

 

[KnuckleDuster]

Sorry, Turbo Action "Tight 10"" , should stall about 3500.

 

[younggun2.0]

Sorry, Turbo Action "Tight 10"" , should stall about 3500.

If it truly flashes at 3500 then I'm guessing 1.70 60' and 12.40 @ 110

 

[stroked340]

What camshaft??..

 

[KnuckleDuster]

Thanks! That's about what I woild expect, too.
Would like to find out the path to about 11.60. (no cage) and I would be done.

 

[KnuckleDuster]

Comp XE285HL

https://m.summitracing.com/parts/cca-cl21-228-4

 

[younggun2.0]

If it truly flashes at 3500 then I'm guessing 1.70 60' and 12.40 @ 110

You need more gear

 

[KnuckleDuster]

You need more gear

l agree, got a deal pending on a 3.90 spool for the track.

 

[RustyRatRod]

"Just" a 3.90? I think a 4.30 would really walk the dog in that.

 

[ian]

"Just" a 3.90? I think a 4.30 would really walk the dog in that.

12.9-13.2 with 3,9 s

 

[383Scampman]

With traction , mid 12's @107mph . With a 4.10 gear low to mid 12's . It would make a great 12'50 second pro-index car .

 

[younggun2.0]

That 410 stroked small block should move pretty good

 

[318willrun]

12.9-13.2 with 3,9 s

I ran low 13's with 3.23, mild 360 (.455 lift/268/276 adv. dur. and cast heads) with same tires, and weight of car. He'll do much better. Even with 3.23's, I guess 12.30's at 106 mph. He might have too much cam for the gear....

 

[thesiren74]

12.40's @110

 

[ian]

not sure on that ,anyway time will tell what is weight with driver ? converter may go 3000 comp a little low with the alloys .when are you doing a pass in it ? knuckle

 

[KnuckleDuster]

Hopefully this weekend. Have only run it once and it was breaking up at about 4000rpm in 2nd, but it cleared up in 3rd and ran a best of 14.4 at @101mph.
Judging by the time I lost, I am hoping for mid 12's now that the issue is resolved. Sounds like that shouldn't be too far off going by the estimates you guys are giving. Will post results when I get them. Thanks!