What equipment is in your Machine Shop, or the Shop that you send your work too.
Like to hear the comparisons..........
Like to hear the comparisons..........
'What's In Your Machine Shop'
- Thread starter 69 Cuda 440
- Start date
-
John,
Valve, Cylinder Head and Block 'Machines'
* Sunnen VGS-2000 {Valve Guide & Seat Machine}
* Kwik-Way Valve Seat Grinder 'Master Kit'
* Jet JTM-4V5-CNC {Vertical Mill} {9" x 49" Platform Table}
* Bridgeport Milling Machine 'J1 Series' 'J-Head' {9" x 42" Platform Table}
* B-H-J Products {Tooling}
* Atlas Tool Lathe {42" Length Bed}
* Cincinnati Tool Lathe {48" Length Bed}
* Sunnen VR-6500 {Valve Refacer}
* Kwik-Way SVS II {Valve Refacer}
* Winona-Van Norman #530-C Broach {Head Milling Machine}
* Storm-Vulcan "85B 'Blockmaster' {Cylinder Head and Block Milling Machine}
* Winona-Van Norman PH-4000 {Cylinder Head and Block Surface Grinder}
Note: No, we do not use a 'Serdi'.
Valve, Cylinder Head and Block 'Machines'
* Sunnen VGS-2000 {Valve Guide & Seat Machine}
* Kwik-Way Valve Seat Grinder 'Master Kit'
* Jet JTM-4V5-CNC {Vertical Mill} {9" x 49" Platform Table}
* Bridgeport Milling Machine 'J1 Series' 'J-Head' {9" x 42" Platform Table}
* B-H-J Products {Tooling}
* Atlas Tool Lathe {42" Length Bed}
* Cincinnati Tool Lathe {48" Length Bed}
* Sunnen VR-6500 {Valve Refacer}
* Kwik-Way SVS II {Valve Refacer}
* Winona-Van Norman #530-C Broach {Head Milling Machine}
* Storm-Vulcan "85B 'Blockmaster' {Cylinder Head and Block Milling Machine}
* Winona-Van Norman PH-4000 {Cylinder Head and Block Surface Grinder}
Note: No, we do not use a 'Serdi'.
very nice equipment got any pics of the jet cnc mill.
cjh
Well-Known Member
How come you don't use/have a Serdi ?????
In my own work shop. A small drill press, bench grinder with up to 10" wheels, belt/disc sander, and commercial grade table saw. I want one of the Shapeoko machines but I wont buy one until I know if it will hold js14 tolerances over long runs.
I farm out work to 2 different shops. I have no desire to list their equipment.
I farm out work to 2 different shops. I have no desire to list their equipment.
I would think he done it that way for 25 plus years and is probably pretty good with a rock .
-
