I've been searching for an hour but can't seem to find a relevant thread. I have a '74 Dart with a 225 /6 and A904 auto tranny. I can find all kinds of info on the pre-'73 models but very little on '73-'76. I need to replace my motor mount rubber. O'reillys only shows these http://www.oreillyauto.com/site/c/d...ngine+mount_5137387_2211&keyword=engine+mount Is it the same for LH/RH mounts? How many per side? Anybody got any pics of the passenger side installed? The driver's side looks simple but I read on slantsix.org and it appears that the passenger isn't nearly as fun to do. Any and all information is greatly appreciated. Thanks!
Which/How/How many engine mounts /6
- Thread starter sargentrs
- Start date
-
nm9stheham
Well-Known Member
1 per side. The O'Reilly part will go in either side; you remove the whole mount and press out the old bushing and press these in.
Alternately, go here http://www.deaproducts.com/ and get the whole assemblies from a place like RockAuto or NAPA.
The reputation of the new production parts is rather looow, as you have probably read! So, if you want durability, maybe try to find some NOS mounts.
Alternately, go here http://www.deaproducts.com/ and get the whole assemblies from a place like RockAuto or NAPA.
The reputation of the new production parts is rather looow, as you have probably read! So, if you want durability, maybe try to find some NOS mounts.
Thanks nm9stheham! Just what I needed to know. I'm just looking for a quick, cheap replacement for now. Mine are toast. I'll save the good stuff for when she needs a heart transplant.
Serj22
Well-Known Member
I just did one of mine, was $7.00 and the process was rediculously easy. I did the passenger side without removing the alternator or anything.
-
