SleeperScamp Well-Known Member Joined May 8, 2006 Messages 2,081 Reaction score 58 Location Texas Mar 9, 2015 #1 So I'm reinstalling the windage tray on my 340 and after putting the washers between the tray and the crank the tray is loose. Is this normal or should it tighten down. Thanks in advance..
So I'm reinstalling the windage tray on my 340 and after putting the washers between the tray and the crank the tray is loose. Is this normal or should it tighten down. Thanks in advance..
66fs FABO Gold Member FABO Gold Member Joined Sep 9, 2009 Messages 8,974 Reaction score 4,232 Location Greenwood, South Carolina Mar 9, 2015 #2 Washers go between the main bolts and main caps
SleeperScamp Well-Known Member Joined May 8, 2006 Messages 2,081 Reaction score 58 Location Texas Mar 9, 2015 #3 Got it figured out... Thanks...