Windshield Gasket Glue

[cpthowdy1369]

Hey guys, I took the windshield and back glass out of my duster and now I have this black leftover "glue" type crap stuck to the metal. What is the best way to get that stuff off?

 

[3404speed]

Stiff putty knife for the bigger stuff, lacquer thinner, or another good solvent for the leftovers

 

[71DusterStruck]

To quote the Plymouth-Chrysler-Imperial Passenger Car 1971 Body Service Manual:
"All old adhesive should be removed from glass and opening reveal using a putty knife or razor blade. DO NOT use an oil base solvent to remove adhesive."
Thats what it says!!

 

[RedFish]

A heat gun will soften the big stuff but be carefull so you dont damage headlinner, etc.. Ford dealership had a product called Acrysol (acrylic solvent) that worked a little better than charcoal starter fluid.

 

[cpthowdy1369]

Thanks guys, I'll try those ideas. The old wire brush on a drill wasn't working very well at all. I don't have to worry about the headliner or anything because everything except the suspention has been removed. 8)