Wiper switch problem

[Dart swinger 73]

Can anyone tell me how to bench test a 3 speed wiper switch. I tested the motor. It's working fine. I have power from the fuse pannell. Tomorrow I'll power up the 4 wires with jumpers and make sure I have power through the firewall. But, if someone could PM me on the switch test tonight. It would give me something to do tonight.:coffee2:

 

[67Dart273]

I have a standard answer, and truly dislike dealing with Mopar wipers. You MUST know which motor you have, as some are different than others

Go to the "Passion" site for some info....

http://www.passion4mopars.com/

............

And also to MyMopar and download the appropriate service manual for your car. Section 8, electrical page 8-94, and switch tests start page 8-100, and 3-speed 8-103

http://www.mymopar.com/index.php?pid=31

By the way some of the manuals there, came from the guys here on FABO

 

[Passion4Mopars]

http://www.passion4mopars.com/Testing-and-Wiring-a-3-Speed-Switch_b_46.html

Many thanks to Jim at JSRestoration for that information on testing a switch.

What's the motor doing when it's run through the switch?