Wires on gauge cluster

[Tribute SS/A 68]

Does anyone have or know where I can see a diagram/layout of where/color wires go, on the back side of a dash gauge cluster on a 68 cuda ?
thanks

 

[fanofpetty]

a factory service manual would be the best place......

 

[momoparman]

try this

http://www.mymopar.com/downloads/1968/68BarracudaA.jpg

http://www.mymopar.com/downloads/1968/68BarracudaB.jpg

 

[DA69RT GT]

The reason this site rocks.... alot of mindless chat and babble going on lately in the General Threads- but this is why I keep coming back. Members who help members.

 

[Tribute SS/A 68]

thanks got those, however, they are not detailed enough to tell exactly where / on what terminals the wires go.

QUOTE=momoparman;1969764976]try this

http://www.mymopar.com/downloads/1968/68BarracudaA.jpg

http://www.mymopar.com/downloads/1968/68BarracudaB.jpg[/QUOTE]

 

[67Dart273]

I don't have a good reference for the Rally dash. If you can shoot and post a good CLEAR shot of both the front and rear of the cluster, I can step you through the connections.

 

[Tribute SS/A 68]

thanks but I have the dash back together, by biggest concern was the large black wire and probably goes to the left of the large red, the cluster reads "red" on one terminal, I assume the Alt gauge, not sure if the black goes on the one beside it, or the next one over. looking at it from the firewall, it;s kinda tight in there

:burnout:

 

[67Dart273]

The "big" red and black wires are indeed the ammeter connections