Wrong pan or wrong gasket?

-

scampy72

Well-Known Member
Joined
Sep 20, 2008
Messages
904
Reaction score
6
Location
North Carolina
Hey guys getting ready to drop my magnum into my scamp. Took the flywheel off and saw a large gap between the pan and block. Can anyone tell me if the pan is wrong from pics. Having trouble locating PN

20230730_123533.jpg


16907380227591444096038002573964.jpg
 
if the front and rear dips are the exact same drop, it is a 318 pan. that looks like a 318 pan, not a 360. look at the other post below yours to see the difference. not the correct pan for the swap.
 
Thanks guys, that's what I was thinking but wanted to be sure. Suffice to say I'm pissed at myself for the mistake mostly cause I was super excited, oh well off I go to find a new pan.
 
All magnums use either a 5.2/ 5.9 magnum pan or a 360 LA SB pan

A 273/318/340 LA pan ONLY fits those engines. It does NOT fit a 360LA or a 5.2 or 5.9 magnum
 
Finally found where I got the pan from (amazon) it is a speedmaster pan and it was labeled for all of those engines and I didn't realize 360 was different when I ordered it.

As a side note anywhere that pan is listed(jegs, speedway etc) its labeled as 273/318/340/360. So be aware. I made the thetake so you dont have to lol
 
-
Back
Top