1MeanA's latest activity
-
1MeanA replied to the thread A833 leaks.Clutch is new and there is lots of free play at the clutch. No dino oil in it(semi synthetic). I'll run something different this... -
1MeanA replied to the thread Anybody running the '68 4 speed 340 cam?.Its a free world. If someone wants to spend double for the supposed 1 degree that's fine. The point is that informing other members...
-
1MeanA replied to the thread Anybody running the '68 4 speed 340 cam?.To add to that, there is nothing wrong with telling someone the product is already available so they don't make an investment in...
-
1MeanA replied to the thread A833 leaks.OK good. I didn't have an in car issue with it. The issue was difficulty getting into 1 or 2 when cold. The selector seems to move...
-
No, you overshifted it. You'll have to gently nudge those struts back home, into the notches, one atta time. Make sure the energizer...
-
1MeanA replied to the thread A833 leaks.After letting it sit overnight there is a very slight weep from the countershaft (one drip overnight). It doesn't explain the volume I...
-
-
1MeanA replied to the thread MP distributor - reducing mechanical advance.I believe that. Just look at the OEM curve above. Its my (perhaps educated) opinion that if your going to weld the outside of the...
-
I did some timing checks today. When I set the advance to 35 degrees at 2500 rpm, I ended up with 25 degrees at 1000 rpm. The problem...
-
1MeanA replied to the thread A833 leaks.I ended up cutting the crossover. I'll make up a removeable section with some band clamps. It will be nice if I ever have to do the clutch.
-
1MeanA reacted to MOPAROFFICIAL's post in the thread stock 340 pushrod end types - ball vs formed with .The stands aren't 90 degrees to the valve, so you end up raising and moving towards the valve with shims. .030 preload is good.
-
Sorry, tried to make it quiet and asked for my sales thread to be reopened, but denied. Many are waiting, but there will be no sales or...
-
1MeanA replied to the thread A833 leaks.I got the transmission separated on the lift but can't get it out without disassembling the TTI exhaust or cutting it. If the H pipe...
-
1MeanA reacted to GTX JOHN's post in the thread So Far, so good at Mopar Nationals for my son and I. with .Well I won again Today. Next Round tomorrow. I got to the Final Four in Stock at the Winternationals and World Final Last year (Plus...
-
What started out as a 46rh transplant in my68 Fastback quickly morphed into a big rabbit hole ! While the engine was out I wanted to...
-
1MeanA reacted to missing linc's post in the thread Small bolt pattern wheels on a 70 340 Dart? with .Are they the original small bolt pattern rotors? If so then you should not have to worry about it. I had the stock small bolt discs on a...
