1WildRT's latest activity
-
1WildRT replied to the thread TKX vs T56.Looking stock the rear position is probably the call... As far as hand position, bending the shift lever you can put it where you want.... -
1WildRT replied to the thread TKX vs T56.Another possibility... And if you can weld you could certainly do this without buying anything... HMS TKX 2" Forward Offset Shifter Stem...
-
-
1WildRT replied to the thread TKX vs T56.6 SPEED Lens for Mopar Pistol Grip Shifter | eBay
-
1WildRT replied to the thread TKX vs T56.Those look substantial..
-
I did, but it's a G3/Holley kit swap specific setup. So it's meant for a motor that is 1.75" forward and maybe up a little from stock...
-
1WildRT replied to the thread Got a favorite dog breed? Which one and why?.I had a golden retriever... For less than a week, took it back to the "friend" that had pawned it off on me... Dumbest dog I've ever...
-
Artificial Ignorance
-
1WildRT replied to the thread Wooo Boy! (A little long & kinda icky).Well.. You certainly know how to have a good time..... Damn.... Good to hear you're on the mend... Hopefully you recover quickly..
-
1WildRT replied to the thread TKX vs T56.The stock crossmember with all the folded metal & layers is certainly stronger than the Hurst offering & probably stronger than the...
-
1WildRT replied to the thread TKX vs T56.And yet in post 45 Duster360LA says otherwise.... All I'm saying is try putting the trans in the car before cutting....
-
1WildRT replied to the thread TKX vs T56.Before hacking up your Dart to install that patch I would try installing the TKX and see if it's really needed.... The torsion bar...
-
That is most likely true from November '72 on. From August '72 to November '72 (which is all '73 model year production) it's not a...
-
1WildRT replied to the thread TKX vs T56.FWIW My combo is a 70 340, 10.2 C/R 230@ .050 Edelbrock heads... Probably 325ish HP flat torque curve from 1700-5000, spins happily to...
-
1WildRT replied to the thread TKX vs T56.I would say that right there is the info that was missing from this thread...
-
1WildRT replied to the thread Upper Ball Joint Question.See what happens when you trust a parts listing.... I've dealt with a apparently early 73 that had the small ball joints...
