273's latest activity
-
273 replied to the thread 383 Stroker build.Sorry misread "850 TQ out of a NA 440 is impossible that's 1.91 lbs-ft per Cid, around 1.7 is the Max effort ceiling." -
273 replied to the thread 1987 318 LA.With a mild cam 205 to 215 and stock 302 heads it will definitely make peak hp at lower rpms.
-
let's start with: what's your budget and what are your expectations. like what do you want to do with the truck: cruiser. bruiser. stop...
-
273 replied to the thread 1987 318 LA.A stock 318 is around 175hp (gross/dyno trim) doesn't take much to add 50-100 hp, power above that stock cr and heads are gonna hold it...
-
273 replied to the thread 383 Stroker build.Never said much higher (probably 200-400 rpms depending on efficiency's) all I said was run the displacement that puts the hp at the...
-
273 replied to the thread 383 Stroker build.No math, no graphs, or articles though :)
-
What a bunch of mumbo jumbo. lol
-
i'd probably run that small cam, it's very similar to the MP purple shaft P4452759 installed around 105~106 it'll move the torque...
-
273 replied to the thread 383 Stroker build.If just answering one persons post, just hit reply on bottom right and it will automatically add the quote for you to reply too. if you...
-
273 replied to the thread Video's (youtube etc..).Here's a video that does a great job explaining hp and torque.
-
273 replied to the thread 383 Stroker build.My opinion he's probably better off listening to his builder than randoms on the internet, but I would think about switching to 400...
-
273 replied to the thread 383 Stroker build.Yes you have the right to your opinion, but it really didn't have anything to do with the OP's build since he's building a stroker aka...
-
273 replied to the thread Thoughts on fuel economy.Do you plan on driving it enough to matter much ? Is 20-40 more gallons (whatever it is) a year really gonna make that much of a...
-
273 replied to the thread 383 Stroker build.Guess you didn't read the stroker part :) (383/478, 4.15")
-
I realize that. Cross purposes. I was talking about stroke length, which is dependant on how long a cylinder is. I'm guessing that what...