273's latest activity
-
Yes, same compression ratio etc. like I posted in post #433. Either low or high compression but same for both. In this case I'm more... -
It would be interesting to see the torque curves of a 440 and 360 built in similar fashion (like I posted in post #433) layed over each...
-
273 replied to the thread Brainstormin' 440 vs 5.9 ....Do you mean same CR ? Cause a 440 with good cr should be 500 + lbs-ft, 600 lbs-ft shouldn't be out of the question, that would be like a...
-
273 replied to the thread Brainstormin' 440 vs 5.9 ....Not any one in particular.
-
273 replied to the thread Brainstormin' 440 vs 5.9 ....After cam intake and headers, like the one's that been posted so far. This one does 444 lbs-ft and 338 hp
-
273 replied to the thread Brainstormin' 440 vs 5.9 ....The peak torque of the rv440 that have been dyno, making 465 ish lbs-ft at best a decent 360 can make similar.
-
One thing I have noticed when tearing down magnum 360 engines is how well the cylinder walls hold up compared to the LA motors...
-
273 replied to the thread Brainstormin' 440 vs 5.9 ....lbs-ft per Cid tells the efficiency of the engine since the 440 makes similar torque as a decent 360 which to me now makes them similar...
-
But, I will do everything I can to give the 440 every opportunity to run its best. It's what I do
-
I gotta be honest.... I've never seen a BB 440 crowd so intimidated by a 200,000 mile 360, with a little more cam. And, who said at...
-
Who cares what Nick did, he's a hack. lol
-
Net is 195 hp, 320 ft lbs trq. I'm guessing that would be about 260 hp / 390 gross ?? It will have headers and 2.5" straight through...
-
273 replied to the thread Budget Build 5.9 for a 71 Scamp.Why people keep correcting you, as you can plainly see in the 2 dyno graphs provided plus the 1,000's of others out there, a mild cam...
-
273 replied to the thread Brainstormin' 440 vs 5.9 ....To me hp wise it's the top that matters, cubes and efficiency is gonna decide where (rpm) it's made.
-
this. this times infinity +1 build around intended use of the car, not some bullshit pie in the sky bragging rights RPM limit, or HP...