33IMP's latest activity

  • 33IMP
    33IMP reacted to TT5.9mag's post in the thread 408 Stroker vs RV 440 with
    Like
    Like
    .
    If you’re going to buy one, contact blueprint. They stand by their work.
  • 33IMP
    33IMP reacted to 71 Sebring +'s post in the thread 408 Stroker vs RV 440 with
    Like
    Like
    .
    I recently did a swap in my 71 satellite Sebring Plus. 318, 904 trans to 440, 727 trans. 20-20 hindsight I would have done stroker to...
  • 33IMP
    33IMP replied to the thread 408 Stroker vs RV 440.
    Yeah 440 Sixpack is surely eye catching.... but you probably could have built the whole 390 for the cost of the sixpack.
  • 33IMP
    33IMP replied to the thread 408 Stroker vs RV 440.
    Just my own opinion, not worth the proverbial grain of salt, but...... I have never been impressed with the parts used in an ATK engine...
  • 33IMP
    33IMP replied to the thread Mopars in the WILD.
    Jeep forward controls are cool!
  • 33IMP
    33IMP replied to the thread Mopars in the WILD.
    Another Mopar powered off brand, spotted at a wild dragstrip. Rolled in on a 60 year old ramp truck, too. Blown injected gen 1, 392.
    • 20220714_175805.jpg
    • 20220714_175628.jpg
  • 33IMP
    33IMP replied to the thread Mopars in the WILD.
    How strict on the "Mopar" in this thread? Saw this factory Mopar powered ride in the Costco gas line. Saving money putting gas in a half...
    • 20230412_115038.jpg
  • 33IMP
    33IMP replied to the thread Mopars in the WILD.
    Mopar in the wild? Found this one in the parking lot of my bank. I've seen it driving around, a few times. I don't know if it's real or...
    • 20240216_093027.jpg
  • 33IMP
    33IMP replied to the thread Head gaskets for Aluminum Heads.
    The white car in the avatar uses an ordinary composition gasket with an aluminum head/iron block. But it does have 27 head bolts. And...
  • 33IMP
    33IMP replied to the thread Head gaskets for Aluminum Heads.
    I used solid copper shim, with hylomar. Sealed up a 11.5 roller motor, no problem.
  • 33IMP
    33IMP replied to the thread Battery kill switch location.
    Push/pull thru the rear panel on one car, one in place of the gas filler in the rear panel, and one in a drilled hole, along with a pair...
  • 33IMP
    33IMP replied to the thread Need to upgrade the diff.
    If you're gonna put any money into an 8 3/4, an A-body version is the best one to spend it on. Personally, the 741 small pinion version...
  • 33IMP
    33IMP reacted to MadScientistMat's post in the thread Need to upgrade the diff with
    Agree
    Agree
    .
    You're going to need the rest of the axle if you buy an 8.75" diff. That a 7.25" in there now. It's likely that getting a complete axle...
  • 33IMP
    33IMP reacted to TT5.9mag's post in the thread Duct tape drags 2025 with
    Like
    Like
    .
    We’re all loaded up and ready to go. Leaving early tomorrow morning.
  • 33IMP
    33IMP replied to the thread Need to upgrade the diff.
    ...and thats generous.
Show older items
Back
Top Bottom