33IMP's latest activity
-
Buckeye is in the West Valley, West of Phoenix heading towards California. -
33IMP replied to the thread Mopar 350 Stroker.Cast pistons and cast crank at 6700?!? YIKES! I had a malfunctioning tach cost me a cast piston 327 once. Piston head separated from the...
-
33IMP replied to the thread Mopar 350 Stroker.Turk is right. The proper tool for what you are doing is a mic. And the mic set he mentioned is a bargain! (A single Starrett is...
-
Something you won't be able to bolt a head to with that rod and piston.
-
I have two Studebakers, both have left hand lug nuts on the driver's side. I think old Fords are the same, and I'm sure others, too...
-
33IMP replied to the thread Trick flow BBM rocker arms.I wonder if they are needle bearing or bushed. I wish a set that looked that good was available with an offset, for $900.
-
1.5 or 1.6 is what the sign said.
-
33IMP replied to the thread Just purchased a diff for my Duster.Agree completely with #13 and 14! I've got 28" tires and 3.91s. I can drive it on the freeway, but I tend to camp in the slow lane...
-
33IMP replied to the thread Trick flow BBM rocker arms.Ratio?
-
33IMP replied to the thread Just purchased a diff for my Duster.For what you saved.on that rear, go to harbor freight, buy a press, and do em yourself!
-
33IMP replied to the thread Just purchased a diff for my Duster.Yeah, you sure didn't get hurt. Good score. Ask if he has drums. (Hard to find).
-
33IMP replied to the thread Manifold Lift Plate.I've used a seat belt to pull a 440/727. (Expired 3"shoulder belt. I'm not completely crazy) A manifold plate is WAY safer! (Mine was in...
-
33IMP replied to the thread Cooling ideas: 440 in a dart.I put the biggest, widest radiator I can get between the frame rails in my cars. Along with a shroud if possible. (My Opel has the...
-
Money, more money
-
33IMP replied to the thread Snell Helmet ......One of my happy moments : One set of belts I had had a "hanging chad" in the year punch out. I glued it back in place, and punched my...