Hi guys I have finally been able to road test my valiant and I can see that my kickdown is not working. I assume that I have not adjusted it correctly. is there an easy way to adjust the cable style linkage so that I know it's right. I am running 360 with 727 and am using the lokar cable set...
I know some of you guys have explained this over and over but I have a 68 valiant that I put a 360 into I am having over charging problems and have replaced everything from alt to reg and rewired from pre 70 to post 70 following the proper diagrams. now I am curious what voltage should I have...
Well by newer i mean 1970 so I have isolated field terminals and as you described vr is a good one. It seems as though the vr is grounded properly and have replaced the vr just to be sure. Even added another ground strap to be certain that the ground path is solid. I will run a few more tests...
So I have recently out a 360 in my 68 valiant and upgraded charging system with newer alt and vr. Now I get 16 volts at alt and the whole system pulsates any ideas? Thanks.
I'm Jason, not real good with these forums. But I have got to a point where I need some advice or help from someone more knowledgable than myself. So I have recently put a 360 in my valiant all is great except my charging system. I upgraded to the newer 3wire style with electronic vr. Now I have...