413's latest activity
-
4413 replied to the thread Low compression 340 VS high compression....Get piston top even with the deck. Loosen the rod bolts. Push piston above deck, tap it down to even with the deck with a piece of...
-
4413 replied to the thread Mu1525-1 new clutch.Whatcha going to do now? Good thing you looked this over and found out before it was in the car.
-
4413 replied to the thread Mu1525-1 new clutch.Doesn't seem right, not a fun job to do it over again.
-
4The old one rides in the middle of the bearing the new one is only touching about 1/16 to a 1/8 of a inch on the outside of the bearing
-
4413 replied to the thread Ideal Operating Temp.Cracks me up when the Six pack tuning questions come up and many swear it needs to be 195 or it will never run right. LOL I like a 160...
-
4413 replied to the thread Mu1525-1 new clutch.Look at the old clutch for the wear marks left by the TO bearing. Show us a picture of the old one, does it look like this?
-
4413 replied to the thread Time for an upgrade..Run a wanted ad for a 3 piece kickdown on FCBO or FBBO. A guy just posted an ad for a bunch of kickdown on FBBO yesterday
-
4413 replied to the thread Mu1525-1 new clutch.Something is wrong there, it won't work out, must figure it out. Or it's a GM part sold for a mopar. Are you using the old bearing...
-
4413 replied to the thread Engine is pulled - 273 rebuild or replacement 360 crate?.I'd get a late 60's 318 for it. Dump the 60 over little one, it is done
-
4413 replied to the thread Time for an upgrade..Congrats that's a good deal. It has more A$$ than a 360 right now! 350 horses and 480 lbs of torque. A 1969 std 440 has a 187 pan, no...
-
4413 replied to the thread Low band apply or not?.Please explain this, they both have the same things going on inside. The high gear drum will still go 3X RPM upon failure of sprag
-
-
4413 replied to the thread old 318 compression problem.guys like this is why holleys are all screwed up when you buy a used one. Look how sooted up his carb is, serious tune problems on that...
-
4413 replied to the thread 1967 dodge dart fender tag decode?.Nice color combo
-
4413 replied to the thread old 318 compression problem.It doesn't have much power, that's the concern. Balancer marks way off, no the timing chain won't do that. Time it by ear. Advance...
