413's latest activity
-
4413 replied to the thread Need some info and pictures of parts on a 1969 M code Dart..I don't think they are made aftermarket. I took some from a parts car. Lots of work to get them ready to go back on like the factory...
-
4413 replied to the thread Final Touches.And paint the holes and let it dry well before putting emblems on. Using auto paint with hardener has the best future to prevent rust.
-
4413 replied to the thread Need some info and pictures of parts on a 1969 M code Dart..Yes as said above it is just thin sheetmetal. Not the torque box. It's on every car. It is to keep the mud and water out of that area...
-
4413 replied to the thread Another Carter AVS question.A piece of advice to those working on an old Carter. Don't remove the jets, you will likely destroy them. That well underneath can be...
-
4413 replied to the thread [Found!] 73+ front sway bar.Not for a 73-76, the bracket is in the center of the arm, not on end by shock bolt.
-
4413 replied to the thread [Found!] 73+ front sway bar.Mopar Performance 1" bar new [FOR SALE] - Mopar perf front sway bar kit 1" diameter P4286702 73-76
-
4413 replied to the thread 8 3/4 with 323 trac lock fluid recommendation.If welding then don't put oil in at first. Wait until the welding is over and cooled off.
-
4and so there is the reason that after 5 or 6 brands/flavors of headers, all my street cars are back to manifolds...
-
4I have a 6cyl radiator ( no clue if it leaks) Air conditioning condenser, a few hoses from the AC. Factory starter- im assuming 6cyl...
-
4I have never used a primer on an engine, but one thing an epoxy primer will do is stick unless oily. And have never had an issue in 70...
-
4413 replied to the thread Engine Paint.I've heard yes/no on primer. Frank Badalson sells PPG engine paint that needs hardener, he says no primer. I've not used it and they...
-
4413 replied to the thread Engine Paint.@Bob Jasinski yes the California rules make it difficult. Never had to deal with that problem.
-
4413 replied to the thread Tuff wheel modification.Well it already has three, so you only have to drill 3 more.
-
4413 replied to the thread Engine Paint.Once you paint an engine with auto paint with hardener you will never use another rattle can. Does not need primer, to many coats are...
-
4413 replied to the thread Engine Paint.Start with an air nozzle. The flaking paint is not adhered well and it will blow off. Hot pressure washer is good also. Then start in...