Recent content by 4Door408

Thanks for all of the suggestions guys. I'll try to find a few minutes tomorrow to try this stuff and I'll keep the thread updated! Thanks again

Dubob, its coming out of the exhaust.

Jerry6, its right around 7-8 at the gauge on the regulator. I guess I should have also mentioned above it is regulated and is a full return system back to the tank. Aeromotive recommends 6-9psi for carb set ups.

Sorry for the long post, I wanted to get as much info out there right off the bat as possible for you guys to analyze.

Hey guys, its been a while since my last post but I'm in serious need of any help anyone can lend. I'm at whits end with this car and just want to resolve these issues and be done with it! I'm turning to the internet's Mopar gurus on this hoping you have some insight. I have a 410" magnum...

Well here is my contribution to the thread and forum. I just picked these up for my 1974 Valiant (formerly 73SwingerBuild's) and took some pictures last weekend. The tires are 215 fronts and 245/60/14 rears. The car has an 8 1/4 rear end, completely stock suspension, and rally wheels off of a...

66, Im waiting to see some pics of them on too. Did they fit ok? I'm looking to get this same size for my 74 Valiant sedan.

Hey thanks for the compliment on the car. Right now it still has the 8 1/4, which I know isn't going to hold up over the long run, but it'll be okay for now for cruising and shows until a decent 8 3/4 pops up that I can afford.

Hey everyone, I thought I would start a thread here to show the build up of my Valiant. I bought it back in summer of 2007. After searching for a Plymouth of my own ( Back in the day my father had a 71 Barracuda, and his brother had a 69 Road Runner that they would both drag race ), I came...

Got it. Thanks for clearing that up. Maybe I'll have to scrap the idea of those Cragars and find something else with 4.25 backspacing. Edit: Okay so maybe I was asking the wrong question. I want to run 235/60/15 Mickey Thompson Street ET's. What wheel width/back spacing should I be looking...

Frog, so they were rubbing where? On outside or inside toward the springs? Sorry didn't get what you meant by corners.

Hey everyone, I just put a post in the wheels/tires section and thought I would put up a few pics and info on my car and what its been through so far. It's a 1974 Valiant, 78k on it. Came from the factory with a 318, 3 speed, 8 1/4 rear, large bolt pattern wheels. I bought it the end of summer...

Hey everyone, I'm new to the forum. After a while searching on here I just figured I would ask. I'm looking at a 235/60/15 tires for the back of my 74 Valiant 4 door (large bolt pattern, 8 1/4 rear). I was wondering if tires that size would fit without any rubbing on these Cragar wheels...