Recent content by '64 Dart

Good Day All and Merry Christmas Looking for the A/C pulley that bolts to the backside of the vibration dampener. Thanks to all who respond. '64 Dart

Yes, The Nylon blocks are present. Pics: Note #8 and #14 does show some repair of the sheet metal was attempted at some point.

Took some pics. Thoughts?

Will do Probable be this PM after I get home from church.

Good Evening Thanks for the response and the photos. This is my first convert and my first 67-69 body style. Have not stuck my head up to see what shape any of this is in. That will be tomorrow's project after church. Thanks again Merry Christmas R Gabel

Good Day All Have a '67 Dart convertible that apparently has lost the torsion in the trunk bars. I've relocated the bars to apply the most torque, but to no avail. So, can anybody supply some knowledge as to what years/body styles will work? Thanks to all who respond. R Gabel

see you then

Perfect How much (+Shipping)?

Good Morning If you can measure the height from the mounting nut (base) to the top of the bevel. I appreciate the time/effort. '64 Dart

Good Morning If it is for the 1 qt filter, yes it is. '64 Dart

Good Morning All Found some discussion of this concerning a Ford 90* adapter. Will a Mopar small block adapter work on a /6? Thanks for your time '64 Dart

Good Day All Looking for the longer (pre 70's) oil filter standpipe (#2402607). This is for the one quart (Wix 51515) oil filter. Thanx for your time '64 Dart

Good Day All Looking for a decent tuff steering wheel (red or maroon) for either a '87 D150 or a '67 Dart GT. Not wanting to break the bank. Thanks for your time '64 Dart

Good Morning All My previous thread was marked 'found' for some reason. I am looking for an RV2 compressor bracket for a /6 (being installed in an '87 D150). Also the double water pump pulley. Thanks tp all who respond. '64 Dart

Good Afternoon All Looking for a RV2 A/C mounting brackets for a /6. Also the double pulley for the water pump. Thanks to all who respond. Omni