Recent content by 65RAGTOP

"semper fi"

pledge on vinyl seat makes it easy to slide off of your seat. less drag=less wear

Yes, and they came off of the car that you see beside the message. I also have a 1965 dart gt convertable thats been totally redone my way. If anyone out there knows gtsdustin let him know about this add. His message box is full. Thanks

Gtsdustin ,i have the fender that you dad needs. I'm located in hagerstown,md. Get back to me. 65ragtop

Kelsey hayes disc brakes are 4" bolt circle .are your cragars 4" pattern?

I think you should move your motor mounts to the rear of the tabs that they bolt to. that may help check to see if yours can be moved. it's worth a try

I believe the taillight that you have is from a 62 63 64 65 Chevrolet. read the print on the lens, that should tell if it's gm or mopar.

get yourself a gps speedometer from speedhut. no more cable or speedo gear problems.i just finished installing their speedo and 4 gauge set.looks great and i/m very pleased with the results.

thank you.

hello to all mopar people, i started a 1966 barracuda HURST HEMI UNDER GLASS model and need some pictures of the rooftop,hood and trunklid so i can paint it the correct way it was.supposed to be .pictures on box only show the sides of the car.any help would be greatly appreciated thanks in...

tell us about the carbs. they look like old stromberg 97 that were used back in the 30s thru 50s.they only flo 150 cfm each. are they cores or rebuilt,do they come with the intake? pm me, tanks

Pm sent

I can''t do pictures, no camera

Just finished putting front end on my 65 dart ragtop and the location of front wheels/tires differs from side to side.drivers front tire is centered in wheelwell.passenger side tire is to the front of the wheelwell,it will hit front fender once it removed from jackstands , and it will hit...

that piece looks like maybe the end off a pushrod that came loose.maybe the person that owned it prior to you had to replace one somewhere along the line. just a guess.