The Promax plates are not properly engineered if you look at your carburetor there is a big void right behind the plate the small sheet metal plate that comes with the original equipment metering plates is designed to seal the plate to the thin sheet metal plates so the carburetors do not take...
The 273 crank will also have a small pilot hole at the rear and will not accept converters after 68. The size of the hole is aproxamently 1.55" and the larger is 1.78"
That's the thing, they fit on the 73's and the K-member measurement is correct as I said in my other post there is enough space to create some wiggle room so this problem dosent exsist even if the car isint perfect. Heck the way it is now you have to raise the engine a 1/2" to 5/8" to get them...
These headers do not fit properly on 67 to 72 year model cars, they do fit on 73 and up due to the difference in the steering linkage on 67 to 72 cars the tierod end studs face up and hit the headers every time and TTI provides instructions on how to get them to fit which requires shimming the...
You may not have had the correct master to start with, you might of had one with a larger bore :dontknow:.I say if it stops better that's good. When you have a larger bore you move more fluid for a given amount of pedal travel, resulting in greater effort, if you had a new 1" m/c their would be...
Here are the Mancini master cylinders http://chucker54.stores.yahoo.net/24whdibrmacy.html the bore is larger than 1" and will increase pedal effort but will still work, just understand that when you go with a larger bore master cylinder, increased pedal effort is what you get.
I stand corrected I have a couple of these units and they do in fact bare the 2225541 casting number. I new I should have taken a look before posting. But with that said the pics posted by roadsterdude look nothing like the correct 2225541 casting, but it looks like fit and function is their and...