Recent content by 67valiant

the smokin was because i forgot to hook up one of my main grounds i fixed that problem, and ya i thats what i was really wondering about the computer, and as far as the distributer i brought the motor to TDC one number one on compression strok and installed the distributer with the rotor...

just replaced my 5.2 to a 5.9 in my 98 dodge ram due to it throwin a rod, after putting the new engine in i had a bad ground and one little ground on the passenger side of the truck coming from the fire wall the block started to smoke, this was on the first inital turning over of the motor fixed...

oh i bet it was i figured it wasn't gonna be the easiest thing to do but ill get it done

thanks thats what i needed to know, im gonna give it a try tonight and see what happens appreciate the help

nope there not mixed up, and yes the adjuster bolt is completly out,

so i replaced the cross memeber in my 67 valinant becasue the passanger side had tore apart where the torsion bar goes through at. we pulled the doner cross member from a 72 and i just set it in there to test fit and i wanted to slide the torsion bars in to make sure everythings good but the hex...

hey im lookin for a fly wheel for a 360 i live just north of detroit but will pay to ship thanks, john

hey guys how do i figure out the cc of my heads, i want to buy upgrade pistons for my 360 but do not know the cc. they are the 915 j heads with no machine work done to them other then a valve job, with the 1.88/1.60, and the deck height is stock nothing has been milled, is there a standard cc...

alright i will just come pick it up from you your only about 40 mins away, can i come this weekend?

yeh i just read up on all of it, im just going to rebuild the 318 heads , im just trying to get it done for the high school nationals saturday at milan ,so its s rush thanks

i have a stock bottom end 318 ran strong just needed to be freshend up. i put a .465/.443 lift cam in and then stock 360 heads, now it does not seem to pull as hard as it used to, are the heads just not going to work, would i be better off with the stock 318 heads any help would be appreciated...

i really need a flywheel for a 360 for a 10 inch clutch let me know what you have, thanks, john

i have a bunch laying around, if your still looking for some let me know and i will get you some pics

i had the same problem on my 318, and on a 360 i bought i tore it down to rebuild it and 2 lobes on the cam were worn off and a bunch of lifters were dished shaped like that, i have heard that cheap oils and some other brands make this happen because of the different additives in the oils, i...

alright thanks alot i really appreciate the help