92b's latest activity

  • 92b
    92b replied to the thread Timing.
    I'm not sure which distributor your refering to but I see this with locked hei and locked msd distributors when checking timing on the...
  • 92b
    92b replied to the thread Timing.
    Yes, generally.
  • 92b
    92b replied to the thread Timing.
    I wonder if the timing curves shown are as seen on a distributor machine or read directly from the running engine on the dyno? It's...
  • 92b
    92b replied to the thread Timing.
    What is the context to the test that says the same engine produced the same power curve with 2-3 degrees less ignition lead? was it a...
  • 92b
    92b replied to the thread Timing.
    Is that a misprint? Should it read "12:1 - 35 to 36" degrees instead of "35 to 60" ?
  • 92b
    92b replied to the thread Timing.
    Are you sure you don't have this backwards?
  • 92b
    92b replied to the thread Timing.
    That is what I usually observe when checking timing with a locked distributor.
  • 92b
    92b reacted to Mean416's post in the thread Budget Build 5.9 for a 71 Scamp with
    Agree
    Agree
    .
    If someone else hasn't mentioned it ... Bring your cam with you to the shop. Tell them to make sure it spins freely after the cam...
  • 92b
    92b replied to the thread Timing.
    Are you using a fast distributor? Also I think you will notice less retard from 4600 to 6600.
  • 92b
    92b reacted to RAMM's post in the thread 302 heads-Is it worth putting them on a stock 318 with
    Like
    Like
    .
    The 2 reasons these heads have ANY kind of following are: 1. For decades Mopar employed that huge and ugly open combustion chamber in...
  • 92b
    92b reacted to NC Engine Builder's post in the thread 302 heads-Is it worth putting them on a stock 318 with
    Agree
    Agree
    .
    If your planning a magnum engine swap, i wouldnt even bother taking the stock heads off your 318. Id save my money and do the magnum...
  • 92b
    92b reacted to 318willrun's post in the thread 302 heads-Is it worth putting them on a stock 318 with
    Agree
    Agree
    .
    To me it would depend on the shape of the heads already on the car. If your compression checks good and pretty even across all 8...
  • 92b
    92b reacted to Vaanth's post in the thread Ignition box questions with
    Thanks!
    Thanks!
    .
    A four pin ECU can be used in a five pin ECU system, but a five pin ECU cannot be used in a four pin ECU system. The original AC Delco...
  • 92b
    92b reacted to PRH's post in the thread Mild 360 engine rebuild recommendations with
    Agree
    Agree
    .
    Keep in mind that pretty much any “performance oriented” piston will be enough lighter than the OE pistons that the crank will need...
  • 92b
    92b reacted to TT5.9mag's post in the thread Brainstormin' 440 vs 5.9 ... with
    Like
    Like
    .
    That made me laugh. Thanks. With the bottle turned off I activate the nitrous plate and use the fuel enrichment as a choke. Works great.
Show older items
Back
Top Bottom