Recent content by 9moes

  1. 9

    340 converter

    Thanks 70aarcuda ,I did'nt know there could be a combination of weights on the converter.(weight on front face of converter for balancing the engine,weight on out side of converter to balance the converter) I think some where in the rebuild processs the weights for the engine got left off or...
  2. 9

    340 converter

    70aarcuda I checked the motor its a 69 model with a mopar preformance cast crank don't know about flex plate but i watched the guy grind a weight off the old converter and spot weld it back on the new one .i had drove the car right after the mishap there was no viberation then ,trans...
  3. 9

    340 converter

    THANKS guys for the replys. before this happened ,when you cranked the car it was smooth( still had lope from cam ect..) but it was smooth. When i first cranked it after the trans build , it was rough feeling, how do i say it it felt like it wasn't ballanced just sitting there,not in gear or any...
  4. 9

    340 converter

    I have a 340 with a 904 behind it .i had the trans rebuilt not long ago by a good trans man. the only problem is now the car has a viberation. at first i thought it might be the universals or the drive shaft. (the trans had to be rebuilt because my younger brother shifited it in reverse at full...
  5. 9

    5.2 mag in 72 swinger

    I have a 72 swinger that i would like to put a 94 5.2 and overdrive trans in. I have the complete truck. would like to just swap it over.Has anybody on this site done this. I know i will have to fab mounts, ect... but what about elec. switches? can i convert old 72 switches to the truck...
  6. 9

    big block to small block baracuda

    Thanks guys for the info. Was thinking about the swap for short term. Going to stroke the 383,but might take a while(money thin)Have every thing for the sb swap but the bellhousing,z-bar,and motormounts to the big block kmenber. was'nt sure about the clucth and flywheel ,but if those will fit...
  7. 9

    big block to small block baracuda

    I have a 69 baracuda notchback with a 383 4 speed, the motors weak . I also have a built 340 with a built 904 behind it .I would like to put the 340 in the 69 and keep the 4 speed .Can someone tell me what parts i will need and kind of the in and outs of this.thanks
Back
Top Bottom