Alphabet Soup's latest activity

  • A
    Alphabet Soup posted the thread Early A frame width in Early A-Body Discussions.
    Anyone know the rear frame rail with, inside to inside on an early A? I have this from the Stahl sale and haven't found anything it...
    • 20251226_163907.jpg
  • A
    Alphabet Soup reacted to 66fyssh's post in the thread PCV grommet with
    Like
    Like
    .
    No, I did not have to drill the hole. It's exactly like the one in your picture.
  • A
    Alphabet Soup reacted to 66fyssh's post in the thread PCV grommet with
    Like
    Like
    .
    I will add, I "thought" I found a Dorman and bought it, but it did not fit. That's when I went with the one from Mancini.
  • A
    Alphabet Soup reacted to Bobzilla's post in the thread PCV grommet with
    Like
    Like
    .
    These covers used to come with the grommets. Now Mopar grommets are discontinued. Mancini Racing stepped up and offers the grommets that...
  • A
    Alphabet Soup replied to the thread PCV grommet.
    I do plan to use the baffle plate that came with the covers. If I don't come up with something else, it looks like the MRE kit is the...
  • A
    Alphabet Soup reacted to slantsixdan's post in the thread PCV grommet with
    Like
    Like
    .
    There's more to consider than just a hole and grommet – if there's no (or inadequate) baffle keeping liquid oil drops out of the PCV...
  • A
    Alphabet Soup reacted to n00blike's post in the thread PCV grommet with
    Like
    Like
    .
    Did you have to drill out the holes? If so what type and size of drill bit did you use? I have some new covers that need the holes...
  • A
    Alphabet Soup reacted to mopowers's post in the thread PCV grommet with
    Like
    Like
    .
    Do a search on this site. There's a great list with part numbers floating around somewhere.
  • A
    Alphabet Soup reacted to 66fyssh's post in the thread PCV grommet with
    Like
    Like
    .
    I bought this grommet kit along with the MP valve covers from Mancini Racing. Did the trick for me. MRE - Valve Cover Grommet Set
  • A
    Alphabet Soup posted the thread PCV grommet in Small Block Mopar Engine.
    I am looking for a push in grommet for these MP valve covers for a PCV. Have any of you guys found one that works? I ordered the one in...
    • 20251206_101746.jpg
  • A
    Alphabet Soup reacted to Ahoey's post in the thread Dual snorkel hood scoop with
    Like
    Like
    .
    My 74 does. What you’re looking at is the way it came out of the box, paint and all. The scoop is on the build sheet. Can get the code...
  • A
    Alphabet Soup replied to the thread 308 heads.
    OK, new info... it looks like 3/8" pushrods will fit in 308 heads with the lobe lift I have. There isn't much room to spare, but enough...
  • A
    Alphabet Soup reacted to Newbomb Turk's post in the thread 308 heads with
    Like
    Like
    .
    In that case the 11/32 is your best option. And Manton makes a very nice part.
  • A
    Alphabet Soup replied to the thread 308 heads.
    I would do that, and I think I could do what little I need with a round hand file. But of course, the heads are already on the motor...
  • A
    Alphabet Soup replied to the thread 308 heads.
    Thanks, I will look. Jim @ Racer Brown lent me some the correct length but they are 3/8". There is room in the 308 heads for 3/8" but...
Show older items
Back
Top Bottom