Recent content by art25

Thanks guys, a little blend work it is! This proves the point its good to ask questions before going too far.

Hi guys, Ive been getting rolling on the motor everyone helped me get ideas for in the thread "79, 360 cam selection" and i've started porting the heads. i'm using a standard dremel and the exhaust bowl came out awesome. The intake though has a hump...

I love the fact that everyone here is giving me some ideas and input on all of this stuff, cant thank you guys enough! As for fish's question with the exhaust, i was gonna do standard 1 5/8 headers with the three inch collectors, dumped. it was ok on the three forty...

i'm gonna give that a try i like weird things like that. i am using the 727 behind the 360, and the converter that came attached to it. bone stocker. battery is in the back already, i was actually thinking one of the race bumpers if i can find one that looks...

if that stuff makes you laugh then knowing what i'm doing with this nitrous motor might kill you. I bought 2 2005 neon srt4s wrecked one....bad... and the other spun a bearing.. it sat in the garage and i had my 340 on a stand next to it.... long story and many beers...

Thats the whole goal here, to see exactly what we can get this thing to do cheap. My money is going into the numbers 340 i have for the car, so while that gets built i have a stock 360 in the car to drive now, and i have the one we are currently...

Quick question, stock 360 from 78, how big of a nitrous shot can i hit it with without grenading it, and with a 750 on top what size jets should i run so i dont run lean. thanks

i'm probably gonna go hydraulic just cause this is sort of an experiment on just what i can squeeze out of it in mostly stock form. Whats the specs on that one. also i found these heads. http://www.aeroheadracing.com/id6.html supposedly as good as the x...

Hi guys, i couldnt resist a spare 360 for $150, downside is its a low compression slug. Good news is its ony got 50,000 on it. i wanna see what the best it will do at the track without major modifications. I'm gonna do a home porting and gasket matching...

The plastic trim piece around my cluster broke on the bottom right and bottom left. its the wood grain with the black and chrome plastic ring around the whole thing. Does anyone know where i can get a reproduction piece to replace it? Thanks

Put the ignition on a toggle switch right off the battery unplugged the white wire and i had ignition. Thanks to everyone that helped me out, its much appreciated.

ok based on that picture pretty close. magnetic pickup side is good, battery + and - is good. the white wire i have grounded so i will disconnect that and cap it. and instead of the original coil positive wire i have it wired to an ignition hot. That is what...

here is one other thing i noticed by accident actually, i took the plug off of the cap and then turned the ignition hot on and i got a spark, but nothing when i crank it only when the power hits the box from turning the key to the on position for a moment.

orange wire to positive on coil small black to negative on coil. thick red to battery positive. thick black to battery negative. the switch wires i have the red to an ignition hot and the other is grounded. opposite side of the box i have the two wires connected to the...

Hi guys! The title says it all. im bringing my dart sport back from the dead and the ignition wiring was toast so i opted to use an msd 6a box. I wired it up as per directions on the box but it is not sparking as it should . its like the distributer is...