B3422w5's latest activity
-
BB3422w5 replied to the thread 416" on the dyno.Huh? Having the convertor hit a few hundred over peak torque is where its at. I try to do exactly that. And in 50 odd years of racing(...
-
BDude, this is my thread so if you don’t have anything practical to add just stop. You’re just creating drama I detest drama especially...
-
BB3422w5 replied to the thread 416" on the dyno.Talked to a buddy who runs an NHRA stocker. He maps his runs. Gen3, fuel injected, zero timing change throughout his runs. Also has a...
-
BB3422w5 replied to the thread 416" on the dyno.That extra torque and horsepower where it matters going down the track could probably result in 12 or maybe even 15 numbers. It’s gonna...
-
BB3422w5 replied to the thread 416" on the dyno.It will run better than 10.20’s. That’s mine in good air at 3350. I just have a 260/264 flat tappet that has 565 gross lift. I am giving...
-
BB3422w5 replied to the thread 416" on the dyno.Newbomb Turk On a motor like the OP has, what would you expect to see on a time slip dialing in the curve like you posted about above...
-
BThe dyno shop owner and I discussed it and he agreed the timing was pretty much optimal. I appreciate the info and I get the idea of the...
-
BB3422w5 replied to the thread Got the Wally today at Xtreme Raceway Park.Great job!
-
BB3422w5 replied to the thread 416" on the dyno.Yes the 6 analog box with built in two step( that I have yet to use) as I footbrake this car.
-
BB3422w5 replied to the thread 416" on the dyno.I have no idea, I check it at 3k and idle.
-
BB3422w5 replied to the thread 416" on the dyno.I am not saying what you are pointing out doesn’t have merit. No reason to get snarky. Lots of very, very sharp guys who I respect a lot...
-
BB3422w5 replied to the thread Race Engine Challenge--North Carolina, April 17-18 2026.I would run the 245cc Indy head then. It’s far superior to a W2.
-
BOne word for this: SWEEEEEEEEEEEEEEEEEET!!!
-
BB3422w5 replied to the thread 416" on the dyno.Some very sharp guys posted in this thread about locked out stuff...
-
BB3422w5 replied to the thread 416" on the dyno.I get all that. All I care about is how it runs between 5k and 6600 or so. At lower rpm’s on the street I don’t really care because it...