Bewy's latest activity
-
BBewy replied to the thread Slant six single, to slant six double..I have been using reverse pattern cams for years. Jon Kaase won the engine masters contest with a RP cam. He was very naughty: used very...
-
-
BBewy replied to the thread Interesting manifold.Yes, John Cain. Based in Newcastle, NSW.
-
BBewy replied to the thread Idling hot.If 'nasty' [ post #16 ] means there was a lot crap coming out when you flushed the system, then there is a good chance that the rad core...
-
BBewy replied to the thread Slant six single, to slant six double..I gave the name of two companies [ links ] that sell carbs for /6 engines.
-
BBewy replied to the thread Anybody running the '68 4 speed 340 cam?.There is no industry 'standard' of 0.750 times the adv duration to get the 050 numbers simply because [a] the tappet lift for adv...
-
BBewy replied to the thread Mopar Performance Cam keyway color.I do not know for sure, but I imagine that they would be 1,2,3,4,5 cam degrees, making the yellow one 8 crank degrees. Remember, the LSA...
-
BBewy replied to the thread Slant six single, to slant six double..I gave you the Weber link in post #25. Racetep in Calif. They have EVERTYTHING Weber & great to deal with. I live in Australia. When US...
-
BBewy replied to the thread thermoquad wont idle down.Some 9000 series TQs had bypass air. On each pri throttle bore. A hole is drilled at an angle in the air horn to intersect the two front...
-
BBewy replied to the thread Front shock upper bushings.On some shocks, the thread on the threaded shaft ends before the bushes are compressed enough....& they feel loose. If this is the...
-
BBewy replied to the thread Mystery Piece.Axle for roller tip in a roller rocker?
-
BBewy replied to the thread Push rod chips.Aftermarket brands maybe pushed in, not welded.
-
BBewy replied to the thread Slant six single, to slant six double..Spending a LOT on a /6 is not worth it in my opinion.....because at the end of the day it is still only a 6 cyl.....& still only 225...
-
BBewy replied to the thread Spark Plug Gap.I would use a bigger gap with HEI. Some HEI engines had 0.080" plug gaps. I run 0.070" gaps with Irid plugs, have done for years At...
-
BBewy replied to the thread MP distributor - reducing mechanical advance.What would worry me with a curve that adds 20* by 1300 rpm is the likelihood of the weights sticking when coming back to idle. Springs...
