They were really good to work with. We were 100% satisfied with there products and service. Believe it or not they are not that bad to get to. You can reach the bottom of the strut if you open the door and remove a panel that we made and they are right there.
I had some laying around that were off of a C5 corvette. So I started with them and figured out that the length was going to work just need more power. The guys at LST can help you out as far as what lb you will need. The hood on our dart is a good bit heaver than a stock because of all the...
We got them from LST in Saskatoon, SK. The Part number for the spring is c19-14-1350n. He can put any style end on them as well.
http://www.lstechnologies.ca/
I went through all the build pics and this was is not posted, but if you look close all the wiring runs through the inner fender well area. There is a rubber close out panel that goes in there so you can not see the wires from the inner fender side plus it protects all the wiring from the...
Here at Big Oak we are currently looking for someone with experience in the hot rod/restoration field. We are a growing hot rod/restoration shop in North East Alabama that has had a great response with our last build a 1965 Dart. We have plenty of work lined up so we are looking for someone to...
We used the ones from Greening Auto Company. They can change the LED lay out up how ever you want them. They are Hella HIDs and they make driving at night a breeze.