Bobzilla's latest activity
-
Bobzilla replied to the thread Cleaning gasket surfaces.A few years ago someone on this site was recommending carbide tipped gasket scrapers. I bought one to try and it is pretty awesome. The... -
Bobzilla replied to the thread drill bit selection.You can use either one of those or the cobalt recomended. Use a sharp new bit with cutting oil and don't go too fast. The cast iron will...
-
Bobzilla replied to the thread Starting spot for jets....Good things come to those who wait. Don’t worry so much. DVW says that guy is good. I would much rather wait longer from a really good...
-
Put down about 1500 miles pulled the motor to change the cam was a bit wild had to pedal it to keep it idling also changed the inlet...
-
Bobzilla replied to the thread Starting spot for jets....At least your block is at the shop, in line for the work. That is good. My junk is still sitting in the garage taking up space.
-
Bobzilla replied to the thread Starting spot for jets....He'll be decking it to true it up anyway, won't he?
-
Don’t loose sleep over it. Put carb on, tune carb. Drive. It’s that easy.
-
Bobzilla replied to the thread Starting spot for jets....Any update on your block, when machining will start? Probably any time now I would think. Looking forward to hearing about your...
-
Put it on with the stock jetting. Tune from there. You have no idea how little or how big the signal will be from the 318. Jetting will...
-
Bobzilla replied to the thread Starting spot for jets....It's winter here Michigan. Are you planning to actually drive it with that carb on or just idle tuning in the garage? I enjoy tinkering...
-
Bobzilla replied to the thread Using Morel solid roller lifters.How about posting the previous part number without pushrod oiling and the new part number with pushrod oiling. Seams like that could be...
-
Bobzilla replied to the thread 5.9 Magnum Street Build - with dyno numbers.PRH, I am pretty sure you are correct. They even had an article on one with stuck valves and that it needed to be fixed with bronze...
-
Bobzilla replied to the thread 5.9 Magnum Street Build - with dyno numbers.It can't be "just" the stainless steel unless those particular valves are some kind of weird alloy. Plenty of factory and aftermarket...